Sony VGN-AW125J User Manual
Page 3
VGN-AWxx Series Hard Disk Drive
Replacement Instructions
FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST
P/N 994660300
Rev. A
3/3
(HDD 2 Reinstallation) Steps 14-15
Step 14. Replace the old HDD 2 assembly
with the new one. Carefully place the HDD
assembly in the HDD bay.
Step 15. Verify that the new HDD 2
assembly is properly secured to the
connector. Reinstall the three (3)
previously removed screws to secure the
HDD 2 assembly in place.
Step 16. Re-attach the HDD access cover by
sliding it in the direction of the arrows shown
above.
Step 18. Reinstall the battery pack and
reconnect the AC Adaptor.
Continue with the recovery process by
following the instructions described on the
back of the recovery disk’s case.
Return the old HDD assemblies to Sony
following the included shipping instructions.
Step 17. Using the enclosed magnetic
screwdriver, secure the HDD access cover
with the screw previously removed.