Sony PCV-RZ20CP - Manual (Page 37)

Connecting the Telephone and Modem Cables
37
Connecting the Telephone and Modem Cables
1 Unplug your telephone cable from the wall jack and plug it into the
telephone jack located on the back panel of your computer.
2 Plug the modem cable (supplied) into the modem line jack, located on the
back panel of your computer
3 Plug the other end of the cable into the wall jack.
To connect the telephone and modem cables (PCV-RZ series model)
Your computer has a protective sticker covering the Ethernet port located
on the rear panel. Connect only 10BASE-T and 100BASE-TX cables to the
Ethernet port. Using other cables or a telephone cable may result in an
electric current overload that can cause a malfunction, excessive heat, or fire
in the Ethernet port. For help on connecting to a network, see your network
administrator.