Sony HCD-GSX100W - Manual (Page 10)

masterpage:Left
filename[\\Win-
78\got78\GSX100Wkaihan\DTP\4245586122\424558612MHCGSX100WU2\GB04CON-CEL.fm]
10 GB
model name1[MHC-GSX100W/MHC-GSX75]
[4-245-586-12(2)] U2/CA2
C To connect to TV, etc.
If noise occurs when the transmitter is
connected to the headphones jack of your
TV or VCR, set the NOISE FILTER switch
on the transmitter to ON.
2
Connect the transmitter to a wall outlet
using the supplied AC power adaptor.
The transmitter automatically turns on.
Notes
• When you connect the transmitter to the analog out
jacks, do not set the NOISE FILTER to ON.
Otherwise, the volume will be limited.
• The NOISE FILTER effects the sound only in case of
such as connections B and C . In connection A,
the switch has no effect.
• For connections B and C , if stereo mini jack is
connected to line out and the NOISE FILTER is set
to ON, audio output will be reduced and audio signal
may be intermittent or auto muting will activate. In
this case, set the NOISE FILTER to OFF.
• When the transmitter is placed on or near a TV, it
may pick up a noise. In such case, place the
transmitter away from the TV.
• Use only the supplied AC power adaptor. Do not use
any other AC power adaptor.
• If the connected component has the AVLS
(Automatic Volume Limiter System) function, be
sure to turn off the function when using the
transmitter. Otherwise, you will have to turn up the
volume of the speaker, and that may cause distortion.
• If the connected component has the BASS BOOST
or MEGA BASS function, be sure to turn off the
function when using the transmitter. Otherwise, the
sound from the speaker may be distorted.
• Do not place the transmitter near a fluorescent lamp,
etc. when using the system.
• When the source audio level is low or no audio signal
is input for 10 seconds or more, the transmitter will
switch to auto muting mode.
• If the transmitter does not detect an audio signal for
a few minutes, the power on the transmitter
automatically turns off. When the transmitter
receives an audio signal again, the power
automatically turns on.
The effective areas of the
transmitter
Wireless system that allows you to use your
system free from the restriction of speaker cords.
The optimum signal reception range is up to
approximately 150 feet (46m) without the
system picking up some interference. However,
the distance may be reduced according to the
surroundings and environment. If the system
picks up some noise while using it within the
above mentioned distance, reduce the distance
between the transmitter unit and the main unit,
or select another channel.
DC IN 9V OFF ON
FILTER NOISE
1 2 3
CHANNEL
R B A L
AUDIO IN
TV, VCR, etc.
Connecting cord
(supplied)
Right channel
(red) Left channel
(white)
to stereo mini jack
to AUDIO IN A jacks
Transmitter
AC power adaptor
(supplied: AC-GSX100)
to wall outlet
to DC IN 9V
jack
Transmitter
Polarity of the plug