Sony PCV-LX920 - Manual (Page 34)

VAIO Slimtop System Reference Manual 22
To enable or disable the CMOS Clear or onboard VGA Interrupt, perform
the following steps:
1
Remove the system cover (see “Removing the System Cover” on
page 24 ).
2
Set the switches according to the table shown in the diagram (see also
“CLR CMOS Jumper” on page 50).
!
Do not change any configuration switch unless directed by an authorized Sony
technician.
O
N 1 2
Switch # Name On Off
1
2
CMOS
AGP_INT
Clear
Enable
Normal
Disable
password
Configuration switches (SWI) O
N 1 2