Sony SA-NS310 - Manual (Page 21)

21 GB
Ne
two
rk Co
n
n
e
c
tio
n
s
If the program does not start
automatically, double-click on
“NS_Setup.exe” on the CD-ROM.
4
Perform setup, following step 1
to 4 of the on-screen
instructions.
When setup is completed, press the “Play
test sound” button to confirm operation of
the speaker by playing the test sound.
Notes
• Before starting this procedure, be aware that your
Wi-Fi network will not be protected until the
setting is complete. After the setting is complete,
your Wi-Fi network will be protected again when
you set wireless LAN security.
• The following procedure must be completed within
30 minutes. If you cannot complete it, turn off the
unit and start over from step 1.
1
Have your wireless network
name (SSID) and Security Key
(if applicable) available for
reference.
Refer to the operating instructions of the
wireless LAN router/access point.
2
Turn the unit on.
Check that the ?/1 (ON/Standby)
indicator changes from flashing in green
to lit in green.
Notes
• If you have set this already with any of
“Option 1” to “Option 4,” setup may not be
performed completely. Be sure to perform
all-reset for the unit. Press and hold the ALL
RESET button until all indicators light
(page 12 for SA-NS410/page 15 for SA-
NS310).
• Do not connect the network (LAN) cable.
3
Download the “NS Setup”
application and launch it.
You can download the free application
from “Google Play” for Android devices
or “App Store” for iPhone/iPod touch/
iPad on the website.
You can search the application easily if
you type “NS Setup” into the search
screen.
When setting up with an iPhone/
iPod touch/iPad
Go to [Settings] - [Wi-Fi] and select
“Sony_Wireless_Audio_Setup”.
If “Sony_Wireless_Audio_Setup” does
not appear, wait until the speaker finishes
turning on.
Option 2: Method for using an
application for smartphones or
Tablets (Android device/iPhone/
iPod touch/iPad)
CD-ROM
SSID (Wireless Network Name)
Security Key (WEP or WPA key)