Sony VPCL216FX User Manual
Page 2
VPCL2 Series Hard Disk Drive
Replacement Instructions
FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST
P/N
989202623
Rev. B
2/4
Hard Drive Cables
Step 4. Grasp the Door stand and rotate
up to disengage the Tabs holding the
Door in place. When the Tabs release,
lift the Door straight up to remove.
Step 5. Using the enclosed magnetic
screwdriver, loosen the four (4) screws
securing the Hard Drive Assembly.
The screws will loosen but not cannot
be completely removed from the Hard
Drive.
Step 6. Grasping the Hard Drive from
the right side, lift up to expose the
Hard Drive Cables as shown.
Step 7. For each Hard Drive Cable,
grasp the Tab on the connector and slide
the Cable away from the Hard Drive to
disconnect. Remove the Hard Drive from
the unit.
Step 8. Remove the four (4) screws
which secure the Bracket to the Hard
Drive. Lift the Hard Drive Bracket
straight up to remove.
Put the screws aside to secure the
Bracket to the New Hard Dive later in
the procedure.
Step 9. Set the old Hard Drive aside.
Hard Drive Disassembly
(Steps 8-12)
Old Hard Drive