Sony PCG-VX88 - Manual (Page 38)

Communicating with an Access Point (infrastructure) Network
An infrastructure network is one that extends an existing wired local network to wireless devices by providing an access
point. The access point bridges the wireless and wired LAN and acts as a central controller for the Wireless LAN. The access
point coordinates transmission and reception from multiple wireless devices within a specific range.
The network key is data used to protect signals passing through a wireless LAN that conforms with IEEE 802.11b
standard. It is also called an "encryption key." Wireless LAN communication can only occur between an access point and
computer that are using the same key information.
When you enter the network key and the connection is made, the access point is registered, and you do not have to enter
the network key when you connect thereafter.:
To connect to an access point network
1. Locate the Wireless LAN switch that is located on the left side of the computer. Move the switch to the ON
position.
2. From the Start menu, point to Connect To, and click Wireless Network Connection. The Connect to a Wireless
Network window appears.
3. Select a network from the Available Networks list box.
4. Type a key in the Network key box. This is necessary if the network was created with an encryption key;
otherwise, you cannot connect to the network.
Connecting to a wireless LAN
5. Click Connect.
To set up an access point network
1. Locate the Wireless LAN switch that is located on the left side of the computer. Move the switch to the ON
position.
2. From the Start menu, point to Connect To, and click Wireless Network Connection. The Connect to a Wireless
Network window appears.
3. Click Advanced. The Wireless Network Connection Properties window appears.
Setting Wireless Network Connection Properties
Page 38