Sony PCG-VX88 - Manual (Page 56)

To connect an optical drive
Procedures for connecting an optical drive may vary, depending on the specific drive you purchase. See the manual supplied
with your optical drive for more information on its installation and use.
You can connect an optical drive while the computer is on. For specific instructions on using your supplied Application,
Driver, and System Recovery CDs, see Using Your Recovery CDs for more information.
1. Remove the PC Card from the bottom side of the optical drive.
Rem ov ing PC Card
2. Insert the PC Card into the PC Card slot with the logo facing up. See Using PC Cards for details.
Inserting PC Card
A protective cover is attached to the lens of the optical drive at the factory. Before using the optical drive, remove
the protective cover.
Page 56