Sony PCG-NV290 - Manual (Page 119)

Using PC Cards
119
1 Remove the PC Card from the bottom of the optical drive.
2 Insert the PC Card into the PC Card slot with the arrow facing the slot. See
“To insert a PC Card” for more information.
See the guide that comes with your optical drive for more information on its
installation and use.
To disconnect a PC Card drive
1 Close any active programs to prevent data loss.
2 Double-click the Safely Remove Hardware icon on the taskbar. The
Safely Remove Hardware window appears.
3 Select the PC Card drive in the Hardware devices window, if it is not
already selected.
4 Click Stop. The Stop a Hardware device window appears.
5 Make sure the PC Card drive is selected, and click OK. A message appears
stating it is now safe to remove the hardware device.
6 Eject the PC Card from the PC Card slot.
Removing a PC Card
✍
Remove the protective cover that is attached to the lens of the optical drive before you
use the drive. See “Inserting and Ejecting CDs or DVDs” for information on how to
open the optical drive to access the lens.