Sony PCV-RZ49G - Manual (Page 236)

Use standby mode
If you set your computer to record TV, then you must have your computer powered on, in standby mode, or in hibernate mode to
successfully record a show. Standby mode runs the computer with minimal power until it turns on when it is time to record. When
recording is complete, the computer returns the state indicated by your computer power settings.
To put your computer into standby mode
1. Press the STANDBY button on the remote.
2. To take the computer out of standby mode, press any button on the remote, move the mouse, or press any key on the keyboard.
Note With some laptop configurations, you might not be able to wake Media C enter from hibernate mode with the remote
control. You must use the keyboard, power button, or another method that has been provided instead. Media C enter can wake to
record TV from hibernate mode.
© 2000-2003 Microsoft C orporation. All rights reserved.
Page 236