Choose a tv signal for use with media center – Sony PCV-RZ49G User Manual
Page 63
Choose a TV signal for use with Media Center
You have four options when asked to choose a TV signal for use with Media C enter:
Cable or digital cable Select this option if your TV signal is provided by a cable TV signal provider.
Satellite Select this option if your TV signal is provided through a satellite dish.
Antenna Select this option if your TV signal is received through the use of an antenna. This could be either a rooftop antenna or
an antenna that is connected to and sits on top of your TV.
No TV serv ice at this time Select this option if you do not want to watch TV by using Media C enter.
When connecting your
to your computer, make sure that the cable you connect is the one that carries the TV signal you
want to use with Media C enter.
Your computer might support a variety of TV signal input methods, such as coaxial, S-Video, or composite. C hoose the input method
that works best for you, and make sure that the signal out from your set-top box or wall outlet is properly connected to the computer.
For information about your particular configuration and to make sure that your devices are connected correctly, refer to your hardware
documentation.
Note Media C enter supports a single TV signal input. If you have more than one TV signal cable in your home, then you must
choose one of them to use with Media C enter. For example, you could have both antenna and cable TV signals in your home, but
you can use only one at a time with Media C enter.
© 2000-2003 Microsoft C orporation. All rights reserved.
Page 63