Sony PCV-RZ49G User Manual
Page 82
I cannot find a code set that works with my set-top box
You make the following three choices in the Media C enter Setup wizard that define what code set is used with your set-top box:
The number of digits required to change channels
Whether another button such as ENTER or OK is required to change channels
The selected code set
If any one of these choices is incorrect, you might not be able to control your set-top box by using the Media C enter remote. To correct
this problem, try the following:
1.
Press the START
button on the remote, and then select Settings.
2.
Select TV.
3.
Select Set up TV signal.
4.
On the TV Signal Setup Screen, select Yes.
5.
As you proceed from screen to screen, try selecting options other than those you originally selected.
Note Only a few set-top boxes require that you press ENTER or OK to change channels.
© 2000-2003 Microsoft C orporation. All rights reserved.
Page 82