Sony KDL-40HX800 - Manual (Page 18)

Recommended viewing angle and distance may vary depending on the TV’s location and room
conditions.
Do not put anything in front of the 3D Sync Transmitter, doing so may affect its function.
Signals between the 3D Sync Transmitter and 3D Glasses may be interrupted if an infrared device
is used near the TV.
Do not place the 3D Sync Transmitter near the TV's front remote control sensor . The
transmitter signal may interfere with infrared remote operation.
3D Menu
You can adjust the following settings by pressing OPTIONS on the remote control and selecting
“3D Menu” from the menu list.
3D Display
- For switching between the 3D and 2D display mode.
3D Depth Adjustment
- For adjusting the depth of 3D pictures on the screen. Available only for content with 3D signals.
Selecting “0” is recommended for normal use. 3D effect may be less pronounced depending on the
settings.
Simulated 3D Effect
- Use to heighten or lessen the 3D effect when you display 2D pictures in simulated 3D.
3D Glasses Brightness
- For setting the image brightness when using 3D display mode. By selecting “Auto,” image
brightness through the 3D Glasses is automatically adjusted in conjunction with the “Scene Select”
setting.
3D Format
Simulated 3D: For viewing regular 2D pictures in simulated 3D.
Side-by-Side: For displaying 3D content in the Side-by-Side format. Selecting this displays two
near-identical pictures side-by-side for 3D viewing. Wear the 3D Glasses before setting “3D Format”
as the instructions will otherwise be unreadable because of doubly-blurred letters on the screen.
Over-Under: For displaying 3D content in the Over-Under format. Selecting this displays two near-
identical pictures one above the other for 3D viewing. Wear the 3D Glasses before setting “3D
Format” as the instructions will otherwise be unreadable because of doubly-blurred letters on the
screen.
18