Sony KDL-40HX800 - Manual (Page 86)

Flashes 3 times: Indicates the glasses have been powered off. The glasses turn off if you hold the
power button down for 2 seconds, or if no signal from the 3D Sync Transmitter is detected for more
than 5 minutes.
Flashes 3 times every 3 seconds: Indicates the battery capacity is almost running out. Replace the
battery.
You cannot turn the 3D Glasses on. (The following illustrations show TDG-BR100.)
Replace the battery referring to the following instructions and illustrations.
1: Open the battery cover using a coin, etc.
2: Push the edge of the battery and remove it at an angle.
3: Insert a battery (CR2032) with its positive (+) side facing up.
4: Close the battery cover using a coin, etc.
5: Make sure the cover is closed.
When opening or closing the battery cover, be sure to insert a coin, etc., into the slot securely to
avoid slippage.
3D pictures are not displayed./3D effect is weak.
Check the connection between the 3D Sync Transmitter and 3D SYNC OUT (if 3D Sync Transmitter is
required to enjoy the feature). Refer to the following instructions and illustration.
- Be sure to turn the TV off before connecting the 3D Sync Transmitter.
- Make sure that “3D Menu” is displayed on the screen by pressing OPTIONS on the remote control,
after the connection has been completed.
3D Sync Transmitter is integrated depending on the TV model.
Press the 3D button on the remote control.
Replace the battery in the 3D Glasses.
LED Indicator
Battery (CR2032)
Coin etc.
TV
3D Sync Transmitter
3D SYNC OUT
86