Sony KDL-40HX800 User Manual
Page 87
Be sure that the 3D Glasses are powered on.
Set the appropriate angle of 3D Sync Transmitter (optional) by using the angle adjustment dial or
adjust its installation location.
Be sure that there are no obstacles between the 3D Sync Transmitter and 3D Glasses.
When the “3D Menu” setting screen appears but 3D pictures are not displayed, turn off the device
that plays 3D content and turn it on again.
3D Sync Transmitter may not work when it is directly under the sunlight.
Perceived 3D effect may vary from person to person.
3D effect may be less pronounced if ambient temperature is low.
3D effect may be less pronounced and the display color will be shifted if you lie down or lean your
head.
Black bars appear on the both sides of the screen when watching 3D pictures.
Black bars appear on the both sides of the screen in order to process 3D signals for the simulated 3D
display mode or when adjusting the depth of 3D pictures in “3D Depth Adjustment.”
3D display automatically switches on when 3D signal is detected.
Select “Off” from “Auto 3D” to manually turn the 3D display on or off. Press HOME, then select
>
Picture & Display > 3D Settings.
The message “3D signal has been detected” automatically appears when 3D signal
is detected.
Select “Off” from “3D Signal Notification.” Press HOME, then select
> Picture & Display > 3D
Settings.
Copyright 2010 Sony Corporation
87