Sony KV-27FV300 - Manual (Page 45)

38
Operating Instructions
Auto Program Perform Auto Program whenever setting up your TV.
Auto program will search for available channels and program receivable
channels.
Channel
Skip/Add Use this feature after you run Auto Program to skip unwanted channels or
add new ones. Press
to open Channel Skip/Add menu:
1 Use the joystick to scroll up and down to select the position of the
desired channel, then press .
2 Use the joystick to scroll up and down to select Skip/Add, then press
.
3 Press the joystick left to return to the channel setup menu or press
to exit.
Channel
Label
Label up to 40
channels with
their call letters Press to open the Channel Label menu:
1 Press , then use the joystick to scroll through the channels until you
reach the desired channel number.
2 Press to activate the channel.
3 Scroll down to highlight “Label”, then press . Use the joystick to
scroll up or down to display the first call letter or number of the
caption. Press
to select. Repeat this process until you finish
selecting all the call letters.
4 When finished, press to activate.
5 Press the joystick left to return to the channel setup menu or press
to exit.
✍
Pressing CH+ or CH- will skip over channels that have been skipped. You can still use the
-
-9 buttons to directly tune to skipped channels.
✍
✍
You cannot use Favorite Channels, Cable, Channel Skip/Add, and Channel Label when Channel Fix is set.