Sony KV-27FV300 - Manual (Page 52)

Using the Menus
45
Using the Timer Menu
Current Time Set your TV to the current day and time.
1
Use the joystick to scroll up or down to enter the correct day and
time, then press .
2 Press to return Timer menu or press to exit the menu.
Timer 1 and
Timer 2
Scheduled
viewing Use the timers to program your TV to turn on and off by day, time,
duration and channel. The timers duration is maximum of 6 hours. When
the channel is fixed, it is not necessary to set the channel. Press
to
program Timer 1 or Timer 2.
1 Use the joystick to highlight to select Timer 1 or Timer 2, then press .
2 Use the joystick to enter the desired day, start time, duration, and
channel, then press
. The timer status should be On when the
Timer has been set, and the Timer light on the front panel of the TV
should be turned on.
3 Press to exit the menu.
✍
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1 and Timer 2 settings will be cleared.
To access the Timer menu, refer to the following steps:
To Display To Highlight To Select
Press joystick f to highlight an option then press .
Timer 1 : Set
Timer 2 : Set
: AM
Video Audio Channel Parent Timer Setup Basic
Current Time
Program the time
Program
Move: Select: End:
✍
You must set the Current Time before you can use Timer 1 or Timer 2.
✍
Select Off to turn off the Timer (your previous settings will be saved).