Sony PFM-42X1S - Manual (Page 100)

44
(GB)
Screen Saver Function / Adjusting Color Matrix
Changing the Image Position
Automatically
1
In the Screen Saver menu, press M/m to move the
cursor (yellow) to “Pic. Orbit” and press ENTER
or
,.
The following menu appears on the screen.
MENU S e l e c t E n d S e t /
S c r e e n S a v e r
P i c . O r b i t
O r b i t :
O r b i t R a n g e :
O r b i t C y c l e :
O f f
S m a l l
5 m i n
ENTER
2
Press M/m to move the cursor (yellow) to “Orbit”
and press ENTER or ,.
The following menu appears on the screen.
MENU E n d
S c r e e n S a v e r
P i c . O r b i t
O r b i t :
O r b i t R a n g e :
O r b i t C y c l e :
O f f
O n
5 m i n
S e l e c t = S e t
3
Select the Orbit mode with M/m.
Off: Cancel the Pic. Orbit function.
On: Set the Pic. Orbit function.
4
Press ENTER or <.
The menu returns to the Pic. Orbit menu.
5
Select “Orbit Range” (moving distance) or “Orbit
Cycle” (time) with
M/m and press ENTER.
The following values can be selected:
Orbit Range: Small, Mid, Large
Orbit Cycle: 10sec, 30sec, 1min, 5min
The following menu appears on the screen.
(When you select “Orbit Range”)
MENU E n d
S c r e e n S a v e r
P i c . O r b i t
O r b i t :
O r b i t R a n g e :
O r b i t C y c l e :
O f f
S m a l l
M i d
L a r g e
S e l e c t = S e t
6
Adjust the Orbit Range or Orbit Cycle with M/m.
7
Press ENTER or < to return to the previous
screen.
When both Pic. Inversion and Pic. Orbit are
set to ON
If the Pic. Orbit function is actuated while the picture
is reversed, the reversed picture is displayed with
changing its position.
Adjusting the Brightness of the
Background (area with no video
signal)
When you use the “4:3” mode or the Picture And
Picture (PAP) mode, if the brightness of the picture
area and the background (area with no video signal)
differs greatly, screen burn-in is likely to happen. You
can adjust the brightness of the background to help
prevent this.
1
In the Screen Saver menu, press M/m to move the
cursor (yellow) to “Background” and press
ENTER or
,.
The following menu appears on the screen.
MENU S e l e c t E n d
S c r e e n S a v e r
O f f
S e t / ENTER
I n v e r s i o n : c . I n v e r s i o n :
P i c . O r b i t
B a c k g r o u n d : G r a y
D a r k G r a y
B l a c k
2
Select the brightness of the background with M/m.
The default setting is Gray.
3
Press ENTER or < to return to the previous
screen.