Actiontec electronic Plug n' Play Voice/Fax Modem V.90 ISA - Manual (Page 14)

14
Configuring Windows 98
Step 1 After you have installed the modem hardware in your computer, plug the
computer back into the wall outlet. Turn on the power and allow the system
to boot normally.
Step 2 Windows 98 will immediately display the Add New Hardware Wizard and
identify the modem as a “56K V.90 Fax/Modem (LKT)”. Click the Next
button.
Step 3 At the next dialog box, make sure that “Search for the best driver for your
device. (Recommended)” is selected, and then click Next.