Actiontec electronic Plug n' Play Voice/Fax Modem V.90 ISA - Manual (Page 9)

9
Configuring Windows 95
Step 1 Upon start-up, Windows 95 detects the modem and displays the New Hard-
ware Found dialog box. Select “Driver from disk provided by hardware
manufacturer” then Click OK.
Step 2 Insert the diskette containing the modem’s Windows 95 .INF files and click
OK
Step 3 If Windows asks for an installation disk, click OK and type A: in the dialog
box that appears and click OK again.
Step 4 After the installer has copied the .INF files to the hard disk, a New Hard-
ware Found dialog box should appear prompting for the “Wave Device for
Voice Modem”. Click OK. (See “Do This First” for information on
UNIMODEM.INF if this screen does not appear).