Sony KDL-55EX500 - Manual (Page 46)

46
Other Information
PC Input Signal Reference Chart for PC and HDMI IN 1/2/3/4
After connecting the PC to the TV, set the output signal from the PC according to the chart below.
For KDL-32EX301/KDL-32FA600 models
For KDL-32EX500/KDL-32EX400 and other KDL-40, 46, 55 and 60 inch models
* The 1080p timing when applied to the HDMI input will be treated as a video timing and not PC timing.
This affects Picture settings and Wide Mode settings. To view PC content set Scene Select to
Graphics, Wide Mode to Full, and Display Area to Full Pixel.
Resolution
Horizontal
frequency (kHz) Vertical
frequency (Hz) Standard
Signals Horizontal
(Pixel)
× Vertical
(Line)
VGA 640 × 480 31.5 60 VGA
SVGA 800 × 600 37.9 60 VESA Guidelines
XGA 1,024 × 768 48.4 60 VESA Guidelines
WXGA 1,280 × 768 47.4 60 VESA
1,280 × 768 47.8 60 VESA
1,360 × 768 47.7 60 VESA
Resolution
Horizontal
frequency (kHz) Vertical
frequency (Hz) Standard
Signals Horizontal
(Pixel)
× Vertical
(Line)
VGA 640 × 480 31.5 60 VGA
SVGA 800 × 600 37.9 60 VESA Guidelines
XGA 1,024 × 768 48.4 60 VESA Guidelines
WXGA 1,280 × 768 47.4 60 VESA
1,280 × 768 47.8 60 VESA
1,360 × 768 47.7 60 VESA
SXGA 1,280 × 1,024 64.0 60 VESA
HDTV* 1,920 × 1,080 67.5 60 CEA-861*
• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC VGA input does not support interlaced signals.
• Your PC must support one of the above PC input signals to display on the television.
• In plug and play, signals with a 60 Hz vertical frequency will be detected automatically. (PC
reboot may be necessary.)