Sony PCV-RX860 - Manual (Page 46)

VAIO Digital Studio Computer Quick Start
46
About Using The Optical Disc Drive(s)
Why doesn’t my optical drive tray open?
Use the Eject button
1 Make sure the computer is turned on.
2 Press the Eject button on the drive.
Use the My Computer icon
1 Click Start in the Windows taskbar, then select My Computer.
2 Right-click the appropriate optical drive icon.
3 Select Eject from the shortcut menu.
When I click an application icon, the message, “You must
insert the application CD into your drive” appears and the
software does not start.
❑ Some software applications require specific files that are located on the
application’s CD-ROM. Insert the disc and try starting the program again.
❑ Check to make sure you inserted the CD-ROM with the label side facing up.
Why can’t I play a DVD or CD media?
❑ After inserting your optical disc, wait a few seconds for it to be detected
before trying to access it.
❑ Verify that the disc is in the tray with the label side facing up.
❑ Install your CD or DVD software according to the manufacturer’s
instructions.
❑ If your drive reads some DVDs or CDs, but not others, check the shiny side
of the disc for dirt or scratches.
✍
Avoid using adhesive labels to identify your CD or DVD media. Adhesive labels may
come off while the CD or DVD media is in use in your optical drive(s) and may cause
damage to the unit.
✍
To recover the CD or DVD software applications that are preinstalled on your
computer, see “Reinstalling software” for more information.