Sony CMT-EH12 User Manual

Micro hi-fi component system, Cmt-eh10/eh12liv, Warning

Advertising
background image

CMT-EH10.GB.2-639-099-11(1)

WARNING

To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.

To reduce the risk of fire, do not cover the ventilation of
the apparatus with newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not
place objects filled with liquids, such as vases, on the
apparatus.

Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.

This appliance is
classified as a CLASS
1 LASER product. This
marking is located on the
rear exterior.

2-639-099-

11(1)

Micro HI-FI

Component System

Operating Instructions

GB

Owner’s Record

The model and serial numbers are located on the rear of the unit. Record these numbers in the space
provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
Model No. ______________ Serial No. ______________

CMT-EH10/EH12LIV

© 2005 Sony Corporation

Printed in China

Printed on 100% recycled paper

using VOC (Volatile Organic

Compound)-free vegetable oil

based ink.

Hooking up the system securely

Disposal of Old Electrical & Electronic

Equipment

(Applicable in the European Union

and other European countries with

separate collection systems)

This symbol on the product or on its packaging indicates
that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of
materials will help to conserve natural resources. For
more detailed information about recycling of this
product, please contact your local Civic Office, your
household waste disposal service or the shop where you
purchased the product.
Applicable accessories: Remote commander
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and Thomson.

Notes on DualDiscs

A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.

Music discs encoded with

copyright protection technologies

This product is designed to playback discs that
conform to the Compact Disc (CD) standard. Recently,
various music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.

NOTICE FOR CUSTOMERS IN THE

U.S.A.

This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.

This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.

CAUTION

The use of optical instruments with this product will
increase eye hazard.

WARNING

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.

CAUTION

You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.

NOTICE FOR CUSTOMERS IN

CANADA

CAUTION

The use of optical instruments with this product will
increase eye hazard.

Except for European model

ENERGY STAR

®

is a U.S. registered

mark. As an ENERGY STAR

®

partner,

Sony Corporation has determined that
this product meets the ENERGY STAR

®

guidelines for energy efficiency.

Antennas

Keep the antennas away from the speaker cords to avoid
picking up noise.

FM lead antenna

(Extend it horizontally.)

AM loop antenna

Power

For models with a voltage selector, set VOLTAGE
SELECTOR to the local power line voltage.

Connect the power cord to a wall socket.
If the plug does not fit the wall socket, detach the
supplied plug adaptor (only for models equipped
with an adaptor).

Right speaker

Wall socket

Insert only the stripped portion of the cord.

Solid (Red/)

Solid (Black/)

Left speaker

Basic Operations

Open the tape

section lid.

Before using the system

To use the remote

Slide and remove the battery compartment lid , and
insert the two R6 (size AA) batteries (not supplied),

side first, matching the polarities shown below.

Notes on using the remote

• With normal use, the batteries should last for about six months.
• Do not mix an old battery with a new one or mix different types of

batteries.

• If you do not use the remote for a long period of time, remove the

batteries to avoid damage from battery leakage and corrosion.

To set the clock
1

Turn on the system.
Press

 (power) .

2

Select the clock set mode.
Press CLOCK/TIMER SET  on the remote. If the
current mode appears on the display, press

/

 on the remote repeatedly to select “CLOCK,” and
then press ENTER  on the remote.

3

Set the time.
Press

/  on the remote repeatedly to set

the hour, and then press ENTER  on the remote.
Use the same procedure to set the minutes.
The clock settings are lost when you disconnect the
power cord or if a power failure occurs.

Selecting a music source

Press the following buttons (or press FUNCTION 
repeatedly).

To select

Press

CD

CD  on the remote.

Tuner

TUNER/BAND .

Tape

TAPE  on the remote.

Component* (connected
using an audio cord)

FUNCTION 
repeatedly until “AUDIO
IN” appears.

* If the component has the AVLS (Automatic Volume Limiter System)

or BASS BOOST function, turn off the function to avoid distorted
sound from the speakers.

Adjusting the sound

To adjust the volume

Press VOLUME +/– on the remote (or turn the
VOLUME control on the unit) .

To add a sound effect

To

Press

Generate a more dynamic
sound (Dynamic Sound
Generator X-tra)

DSGX  on the unit.

Set the sound effect

EQ  on the remote.

Playing a CD/MP3 disc

1

Select the CD function.
Press CD on the remote (or FUNCTION repeatedly)

.

2

Place a disc.
Press

PUSH OPEN/CLOSE on the unit, and place a

disc with the label side up on the CD compartment.
To close the CD compartment, press

PUSH OPEN/

CLOSE on the unit.

PUSH OPEN/CLOSE

3

Start playback.
Press

 (play)  (or CD/ (play/pause)  on

the unit).

To

Press

Pause playback

 (pause)  on the remote
(or CD/

  on the unit). To

resume play, press it again.

Stop playback

 (stop) .

Select a folder on an
MP3 disc

+/– .

Select a track or file

 (go back/go forward)
on the remote (

  on the

unit) .

Find a point in a
track or file

Hold down

/ (rewind/fast

forward)  during playback, and
release it at the desired point.

Select Repeat Play

REPEAT  on the remote
repeatedly until “REP” appears.

To change the play mode

Press PLAY MODE  on the remote repeatedly while
the player is stopped. You can select normal play (“

for all MP3 files in the folder on the disc), shuffle play
(“SHUF” or “

SHUF*”), or program play (“PGM”).

* When playing a CD-DA disc,

(SHUF) Play performs the same

operation as SHUF Play.

Notes on Repeat Play

• All tracks or files on a disc are played repeatedly up to five times.
• “REP1” indicates that a single track or file is repeated until you stop

it.

Notes on playing MP3 discs

• Do not save other types of tracks or files or unnecessary folders on a

disc that has MP3 files.

• Folders that have no MP3 files are skipped.
• MP3 files are played back in the order that they are recorded onto

the disc.

• The system can only play MP3 files that have a file extension of

“.MP3”.

• If there are files on the disc that have the “.MP3” file extension,

but that are not MP3 files, the unit may produce noise or may
malfunction.

• The maximum number of:

– folders is 150 (including the root folder).
– MP3 files is 255.
– MP3 files and folders that can be contained on a single disc is 256.
– folder levels (the tree structure of files) is eight.

• Compatibility with all MP3 encoding/writing software, recording

device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.

Notes on playing multisession discs

• If the disc begins with a CD-DA (or MP3) session, it is recognized

as a CD-DA (or MP3) disc, and playback continues until another
session is encountered.

• A disc with a mixed CD format is recognized as a CD-DA (audio)

disc.

Listening to the radio

1

Select “FM” or “AM.”
Press TUNER/BAND  repeatedly.

2

Select the tuning mode.
Press TUNING MODE  on the remote repeatedly
until “AUTO” appears.

3

Tune in the desired station.
Press +/– on the remote (or TUNING + or – on
the unit) . Scanning stops automatically when a
station is tuned in. When you tune in a station that
provides RDS services, the station name appears on
the display.

Tip

To stop automatic scanning, press

 (stop) .

To tune in a station with a weak signal

Press TUNING MODE  on the remote repeatedly
until “MANUAL” appears, and then press +/– on the
remote repeatedly (or TUNING + or – on the unit)  to
tune in the desired station.

To reduce static noise on a weak FM stereo

station

Press FM MODE  on the remote repeatedly until
“MONO” appears to turn off stereo reception.

Playing a tape

Use buttons on the unit for the operation.

1

Select a tape function.
Press FUNCTION repeatedly (or TAPE on the
remote) .

2

Insert a tape.
Press

 (stop/eject)  on the unit, and insert the

tape into the cassette holder. Make sure there is no
slack in the tape to avoid damaging the tape or the
tape deck.

3

Start playback.
Press

 (play)  on the unit.

To

Press

Pause playback

 (pause)  on the unit. To
resume play, press it again.

Stop playback

 (stop/eject)  on the unit.

Rewind or fast
forward*

/  on the unit.

* Be sure to press

 (stop/eject)  on the unit after the tape has

been wound or rewound to the end.

Note

Do not turn off the system during playback or recording.

Changing the display

To change

Press

Information on
the display

1)

DISPLAY  repeatedly when the
system is on.

Display mode
(Clock)

DISPLAY  when the system is
off

2)

. The clock is displayed for

eight seconds.

1)

For example, you can view CD/MP3 disc information, such as the

track or file number or folder name during normal play, or the total
play time while the player is stopped.

2)

The STANDBY indicator lights up when the system is turned off.

Notes on the display information

• The following are not displayed correctly;

– total playing time for a disc with MP3 files.
– elapsed playing time and remaining time of an MP3 file encoded

using a VBR (variable bit rate) when the file is played or is shifted
with fast forward or fast reverse.

– folder and file names that do not follow either the ISO9660 Level

1 or 2 standard.

• The following are displayed;

– ID3 tag information for MP3 files when ID3 version 1 and version

2 tags are used.

– up to 15 characters of ID3 tag information using uppercase letters

(A to Z), numbers (0 to 9), and symbols (‘< > * + , – / @ [ \ ] _).

Using optional audio

components

To connect an optional headphones

Connect headphones to the PHONES jack  on the
unit.

To connect an optional component

Connect additional audio source components to the
AUDIO IN jack  on the unit using an audio cord (not
supplied). Turn down the volume on the system, and then
select the AUDIO IN function.

Advertising
This manual is related to the following products: