Sony RMT-840 - Manual (Page 53)

U
si
n
g t
h
e
M
e
nu
Using the Menu 53
SHOT TRANS
Select this setting to set the transition duration and time. See page 37 for details
on using the shot transition function.
TRANS TIME
Select the time that takes to make a transition from the current setting to the
selected setting.
Duration from [2.0 sec] through [15.0 sec] are available. It is set to [4.0 sec] in the
default setting.
TRANS CURVE
Select the transition curve.
The figures below show the transition curve of each mode.
*1: parameter level
*2: transition of time
b Note
• Before setting [SHOT TRANS], turn off all of the STORE/CHECK/EXEC lamps by
pressing the button repeatedly (p. 37).
LINEAR Select to make the transition linearly.
G SOFT STOP Select to make the transition slowly at the end.
SOFT TRANS Select to make the transition slowly at the
beginning and end, and linearly in between.
*1
*2
*1
*2
*1
*2
, continued