Sony RMT-840 - Manual (Page 55)

U
si
n
g t
h
e
M
e
nu
Using the Menu 55
Speeds 1 through 8 are available. The larger the number, the faster the zoom
speed.
3 Select [OK] by turning the SEL/PUSH EXEC dial, then press the dial.
4
Press MENU to hide the menu screen.
ZEBRA LEVEL
See page 31 for details.
CENTER MARKR
b Note
• The center marker and its position do not affect the adjustment, setting, or recording in any
way.
FRAME REC
You can record pictures with a stop-motion animated effect by alternately
recording a few frames and then moving the subject a little. Operate your
camcorder using the Remote Commander to prevent camera shake.
b Note
• When you use frame recording continuously, the remaining tape time will not be indicated
correctly.
• The last scene will be longer than other scenes.
• You cannot record index signals during frame recording.
DV WIDE REC
See page 40 for details.
G OFF Select when you do not want to display the center marker on the
screen (p. 21).
ON Select to display the center marker on the screen.
G OFF Select to record in the standard recording mode.
ON ( ) Select to record pictures using the FRAME REC function.
1 Select [ON], then press the dial.
2
Press MENU to hide the menu screen.
3 Press REC START/STOP.
A picture (approximately 6 frames) is recorded, and your
camcorder enters the standby mode.
4 Move the subject and repeat step 3.