Sony RMT-840 - Manual (Page 69)

U
si
n
g t
h
e
M
e
nu
Using the Menu 69
by turning SEL/PUSH EXEC dial,
then press the dial.
[ASSIGN1] through [ASSIGN3] are
available. [------] is displayed at the number
that no function is assigned.
5
Select the function to be assigned by
turning SEL/PUSH EXEC dial, then
press the dial.
6
Select [OK] by turning SEL/PUSH
EXEC dial, then press the dial.
7
Press MENU to hide the menu.
z Tip
• When you press the ASSIGN button assigned to the
[STEADYSHOT], the SteadyShot function is
released and
appears on the LCD screen. To
activate the SteadyShot fucntion, press the same
button again. You can select the effect level of the
SteadyShot function at [STDYSHOT TYP] on the
(CAMERA SET) menu (p. 54).
• There are independent buttons of DISPLAY and
BARS, however you can assign them also to the
ASSIGN buttons at your convenience. You can use
both buttons.