Sony RMT-840 - Manual (Page 24)

Recording 24
Displaying the recording setup
information – Status check
You can check the setup value of the
following items in the standby mode or
during recording.
• Audio setup such as microphone volume level
(p. 36)
• Output setup ([COMPONENT], [i.LINK
CONV], and [TV TYPE] settings) (p. 60)
• Functions assigned to the ASSIGN buttons
(p. 68)
• Picture profile setup (p. 34)
1
Press STATUS CHECK.
2
Turn the SEL/PUSH EXEC dial to
display the desired item.
Each time you turn the dial, the items
appear in the following order:
AUDIO
t OUTPUT t ASSIGN t
PICT. PROFILE
To turn off the display of the recording
setup information
Press STATUS CHECK.
b Note
• Information of the picture profile setup does not
appear when it is set to [OFF].