Sony RMT-840 - Manual (Page 39)

Recor
d
ing
Recording 39
2
Press REC START/STOP.
The FADER indicator stops flashing and
disappears when the fade is complete.
To cancel the operation
Press the ASSIGN button assigned to the
FADER function repeatedly until the FADER
indicators disappear.
b Note
• You cannot use the FADER function together with
[FRAME REC] (Frame recording).
Recording an index signal at the
beginning of recording
If you make an index for a scene, you can
easily search for the scene later (p. 50).
The index function will make it easier to
check the transition of recording or edit your
pictures using index signals.
Assign the index function to one of the
ASSIGN buttons in advance. See page 68 to
assign a function.
Press the ASSIGN button assigned to the
index function.
When pressed during recording
appears for about 7 seconds and an index
signal is recorded.
When pressed in the standby mode
flashes.
After you press REC START/STOP to start
recording,
appears for about 7 seconds and
an index signal is recorded.
To cancel the operation
Before starting to record, press the ASSIGN
button assigned to the index function again.
b Note
• You cannot record an index signal on a recorded tape
afterward.
REC START/STOP