Sony RMT-840 - Manual (Page 52)

Using the Menu 52
Using the
(CAMERA SET) menu
– STDYSHOT TYP/FRAME REC, etc.
You can select the items listed below on the
CAMERA SET menu. For details on how to
select items, see “Selecting menu items”
(p. 51).
The default settings are marked with G. The
indicators in parentheses appear when the
setting is selected. The settings you can adjust
vary depending on the power mode of your
camcorder. The screen shows the items you can
operate at the moment. Unavailable items will
be grayed out.
WB PRESET
Select to use the preset white balance. See page 26 for details.
AE RESPONSE
Select the speed to adjust the exposure automatically, in accordance with the
brightness of the subject. [FAST], [MIDDLE], and [SLOW] are available.
GAIN SETUP
Select the adjustment value for each position (H, M, and L) of the GAIN switch
(p. 28).
1 Select [H], [M], or [L] by turning the SEL/PUSH EXEC dial, then press
the dial.
2 Select an adjustment value by turning the SEL/PUSH EXEC dial, then
press the dial.
0dB, 3dB, 6dB, 9dB, 12dB, 15dB, and 18dB are available. The larger the
number, the greater the gain.
3 Select [OK] by turning the SEL/PUSH EXEC dial, then press the dial.
4 Press MENU to hide the menu screen.
CAMERA SET STBY
RETURN
WB PRESET
AE RESPONSE
GA I N SETUP
SHOT TRANS
STEADYSHOT
STDYSHOT TYP
FLCKR REDUCE
[ MENU ] : END
OUTDOOR