Using the (lcd/vf set) menu - lcd color, etc, Using the, Lcd/vf set) menu – Sony RMT-840 User Manual
Page 58: T (p. 58), Using the (lcd/vf set) menu, Lcd color, Lcd bl level, Vf b.light, Lcd color, etc
Using the Menu
58
Using the
(LCD/VF
SET) menu
– LCD COLOR, etc.
You can select the items listed below on the
LCD/VF SET menu. For details on how to
select items, see “Selecting menu items”
(p. 51).
The default settings are marked with G. The
settings you can adjust vary depending on the
power mode of your camcorder. The screen
shows the items you can operate at the moment.
Unavailable items will be grayed out.
LCD COLOR
Turn the SEL/PUSH EXEC dial to adjust the color on the LCD screen. The
recorded picture will not be affected by this setting.
LCD BL LEVEL
You can adjust the brightness of the LCD screen’s backlight. The recorded picture
will not be affected by this setting.
b
Note
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for this setting.
VF B.LIGHT
You can adjust the brightness of the viewfinder. The recorded picture will not be
affected by this setting.
b
Note
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for this setting.
LCD / VF SET
RETURN
LCD COLOR
LCD BL LEVEL
VF B . L I GHT
[
MENU
]
: END
G
NORMAL
Standard
brightness.
BRIGHT
Select to brighten the LCD screen.
G
NORMAL
Standard brightness.
BRIGHT
To brighten the viewfinder screen.
Low intensity
High intensity