Sony VGC-RA820G - Manual (Page 57)

Connecting the Remote Sensor and Remote Sensor Control(s)
57
Connecting the Remote Sensor and
Remote Sensor Control(s)
The remote sensor communicates with the Media Center remote control,
enabling you to change channels and to perform other functions. If you are using
a cable or satellite set-top box, you can attach the remote sensor control
*
to
operate the set-top box with the Media Center remote control.
To connect the remote sensor
1 Connect the remote sensor unit to a USB port located on either the front or
back panel of your computer.
2 Position the remote sensor to enable unobstructed communication with your
remote control.
* Two (2) remote sensor controls are supplied. You can use your remote control to
operate two separate set-top boxes.
Connecting the remote sensor (back panel)
FRONT
WOOFER
/CENTER REAR
Remote sensor
(supplied)