Sony RDR-HX715 - Manual (Page 103)

103
Add
iti
on
al
I
n
fo
rm
at
io
n
Playback stops automatically.
, If the DVD has an auto pause signal, the recorder
stops playback at the auto pause signal.
Some functions such as Stop, Search, or Slow-
motion Play cannot be performed.
, Depending on the DVD, you may not be able to
do some of the operations above. See the
instruction manual supplied with the disc.
The language for the sound track cannot be
changed.
, Multilingual tracks are not recorded on the DVD
being played.
, The DVD VIDEO prohibits the changing of the
language for the sound track.
, Try changing the language using the DVD
VIDEO’s menu.
The subtitle language cannot be changed or
turned off.
, Multilingual subtitles are not recorded on the
DVD VIDEO.
, The DVD VIDEO prohibits changing of the
subtitles.
, Try changing the subtitle using the DVD
VIDEO’s menu.
, The subtitles cannot be changed for the titles
recorded on this recorder.
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
VIDEO being played.
, You are trying to change the angles when “
”
does not appear on the TV screen (page 61).
, The DVD VIDEO prohibits changing angles.
, Try changing the angle using the DVD VIDEO’s
menu.
, The angles cannot be changed for the titles
recorded on this recorder.
The MP3 audio tracks do not play.
, The MP3 audio tracks are not recorded in a
format that the recorder can play (page 70).
The JPEG image files do not play.
, The JPEG image files are not recorded in a
format that the recorder can play (page 70).
, Progressive JPEG images cannot be played.
TV Pause does not work.
, You are recording to the HDD or the HDD is full.
The channel cannot be changed from the
channel you are recording.
, Set the TV’s input source to “TV.”
Recording does not start immediately after you
press
z REC.
, Operate the recorder only after “LOAD,”
“FORMAT,” or “INFOWRITE” disappears
from the front panel display.
Nothing was recorded even though you set the
timer setting correctly.
, There was a power failure during recording.
, The recorder’s internal clock stopped due to a
power failure that lasted for more than 1 hour.
Reset the clock (page 89).
, The channel was hidden after the timer recording
was set. (See “Customizing the TV Guide On
Screen System” on page 47.)
, Disconnect the AC power cord from an AC
outlet, and connect it again.
, The program contains copy protection signals
that restrict copying.
, The timer setting overlapped another setting that
was set later.
, There is no DVD inside the recorder.
, There is not enough disc space for the recording.
, The set top box was turned off.
, The set top box controller was incorrectly
connected (page 15).
, The settings in “Set Top Box Control” in
“Settings” setup have been changed (page 90).
, A separate recording was in the process of being
made without the use of the timer (page 56).
, The recorder was in the process of dubbing
(HDD
yDVD).
, The recorder was in the process of DV/Digital8
Dubbing.
Recording does not stop immediately after you
press
x REC STOP.
, It will take a few seconds for the recorder to input
disc data before recording can stop.
Recording/Timer recording/
Editing
,continued