Sony RDR-HX715 - Manual (Page 20)

20
Step 4: Connecting the Audio Cords
Select one of the following patterns
A or B, according to the input jack on your TV monitor, projector,
or AV amplifier (receiver). This will enable you to listen to sound.
A Connecting to audio L/R (left/right) input jacks
This connection will use your TV’s or stereo amplifier’s (receiver’s) two speakers for sound. You can
enjoy the following surround effects (page 61).
• TV: Dynamic, Wide, Night
• Stereo amplifier (receiver): Standard, Night
B Connecting to a digital audio input jack
If your AV amplifier (receiver) has a Dolby *1 Digital or DTS *2 decoder and a digital input jack, use this
connection. You can enjoy Dolby Digital (5.1ch) and DTS (5.1ch) surround effects.
* The yellow plug is used for video signals (page 18).
VIDEO
AUDIO
INPUT
L
R
VHF/UHF
~ AC IN
COMPONENT
VIDEO OUT
P B
Y
P R
1
2
VIDEO S VIDEO R-AUDIO-L
IN
OUT
COMPONENT
VIDEO IN
P B
Y
P R
DIGITAL OUT
SET TOP
BOX
CONTROL
G-LINK
COAXIAL
OPTICAL
PCM/DTS/
DOLBY DIGITAL
LINE OUT
1
3
VIDEO S VIDEO R-AUDIO-L
LINE IN
HDMI OUT
B
A
DIGITAL OUT
COAXIAL
OPTICAL
PCM/DTS/
DOLBY DIGITAL
1
2
VIDEO S VIDEO R-AUDIO-L
LINE OUT
HDMI OUT
AV amplifier (receiver)
with a decoder
(red)
TV, projector, or AV
amplifier (receiver)
Audio/video cord
(supplied)
: Signal flow
Coaxial digital cord (not supplied)
to DIGITAL OUT (COAXIAL or OPTICAL)
to LINE OUT (R-AUDIO-L) 1 or 2
Optical digital cord (not supplied)
Rear (L)
DVD recorder
(white)
(yellow)*
(yellow)
(white)
(red)
[Speakers]
Front (L)
[Speakers]
to coaxial or
optical/HDMI
digital input
Rear (R)
Front (R)
Subwoofer Center
HDMI cord
(not supplied)
or or