Sony RDR-HX715 - Manual (Page 24)

24
1
Slide the TV/DVD switch to DVD.
2
Hold down
[/1, and enter the
manufacturer code (see the table below)
for your AV amplifier (receiver) using the
number buttons.
3
Release
[/1.
The VOL +/– buttons control the AV
amplifier’s volume.
If you want to control the TV’s volume, slide
the TV/DVD switch to TV.
z Hint
If you want to control the TV’s volume even when the
TV/DVD switch is set to DVD, repeat the steps above
and enter the code number 90 (default).
Code numbers of controllable AV amplifiers
(receivers)
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your AV amplifier (receiver).
If the supplied remote interferes with your other
Sony DVD recorder or player, set the command
mode number for this recorder and the supplied
remote to one that differs from the other Sony
DVD recorder or player.
The default command mode setting for this
recorder and the supplied remote is DVD3.
1
Press SYSTEM MENU.
The System Menu appears.
2
Select “SETUP,” and press ENTER.
Controlling the volume of your AV
amplifier (receiver) with the
remote
Manufacturer Code number
Sony 78, 79, 80, 91
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96
1 2 3
4 6
7 8 9
0
5
TV/DVD switch
[/1
VOL +/–
Number buttons
If you have a Sony DVD player or
more than one Sony DVD recorder
1 2 3
4 6
7 8 9
0
5
SYSTEM
MENU
M/m,
ENTER
COMMAND
MODE
switch
O RETURN
SETUP
Settings
Easy Setup
Tuner Preset
Options
Features
Audio
Video
Clock
Set Top Box Control
Language
Area Setup