Sony PCWA-C100 - Manual (Page 13)

13
Getting started
To the PC card slot.
Insert the card
in the direction
of the arrow.
Inserting the Wireless LAN PC Card
This section explains how to insert and remove the Wireless LAN PC Card
from your computer.
You do not need to turn off your computer when inserting the Wireless
LAN PC Card.
1
Remove the PC card slot protector from the computer.
(Some computers contain the PC card slot protector to prevent damage
to the slot while not in use.)
2
Insert the Wireless LAN PC Card in the PC card slot.
Push the Wireless LAN PC Card into the slot until it is firmly seated.
Inserting the card will extend the eject button.
If the card does not fit easily, do not force it in. Take the card out and
try reinserting.
Notes
• Do not install the PC Card Driver that is included in the 1WinMe, 2Win2k or 3Win98
folder of the CD-ROM supplied with the Wireless LAN PC Card. Windows XP has a
suitable device driver for the Wireless LAN PC Card, and it is automatically installed
when you insert the Wireless LAN PC Card into your computer.
• If your computer has two PC card slots, insert the Wireless LAN PC Card into the top
slot. Inserting it into the bottom slot blocks the top slot with its antenna.
• Before using the Wireless LAN PC Card, turn off System Suspend mode or System
Hibernation mode using the PowerPanel software.
• While the computer is in System Suspend mode or System Hibernation mode, the
Wireless LAN PC Card may not be recognized when it is removed and reinserted.