Sony PCWA-C100 - Manual (Page 33)

33
Wireless LAN connection
Note
The following restrictions apply when transferring files using drag and drop.
• If you send a file with the read-only attribute, the read-only attribute is lost when
the file arrives at the receiving computer.
• Folders cannot be transferred.
• The maximum total size of files that can be transferred is approximately 100 MB.
• The maximum number of files that can be transferred is 256.
• File transfer is not possible if the amount of available hard disk drive space at the
destination is less than approximately 175 MB.
• File transfer is not possible if files are named using double-byte characters (such
as those used in Japanese and Chinese.)
4
Confirm the destination and the filename and click OK.
The name of the destination computer changes to yellow. The name of
the Access Point also changes to yellow when you drag and drop
(Broadcast) a file onto the Access Point.
Operation on the receiving computer
1
When a file is receiving, the name of the sending computer
changes to yellow.
2
Double-click on the name of the computer on the Wireless
Palette.
The WirelessCapsule folder is displayed. When necessary, move or
copy the file to the appropriate location.
z Hints
• Files that received are saved in the “WirelessCapsule” folder.
• When you first start the Wireless Palette, the “WirelessCapsule” folder is created
directly below the startup drive. However, you can change that through settings.
• Right-click the reception level indicator icon on the taskbar, click on Capsule
Setup to view the WirelessCapsule Setup screen. (The reception level indicator
icon may also appear as
or .)
• If the name of the file to be received is the same as the name of a file in the
“WirelessCapsule” folder, by default that file is overwritten. However, if you
select “Save with different,” that file will be saved under a different name.