Sony PCWA-C100 - Manual (Page 16)

16
• Check the six-digit Access Point ID on the bottom surface of the Access
Point.
• Install and connect the Access Point. (Refer to the Access Point
Operating Instructions manual.)
• Insert the Wireless LAN PC Card into the computer.
Note
Make sure that the Use Windows to configure my wireless network settings check box is
checked. This option is checked by default.
To Select the Use Windows to configure my wireless network
settings:
1 From the start menu, click Control Panel, and then double-click
Network Connections.
2 Right-click Wireless Network Connection and then click Properties.
3 Click Wireless Networks tab.
4 Select the Use Windows to configure my wireless network settings
check box.
1
Right-click the Wireless Network Connection icon on the
taskbar, then select View Available Wireless Networks from
the shortcut menu.
The Connect to Wireless Network dialog box appears.
Access Point ID
Factory default Encryption KEY