Selecting the hdmi pass through function, Details, Help guide – Sony MDR-HW700DS User Manual
Page 76: Search
MDR-HW700DS
>
Selecting the HDMI Pass Through function
You can select whether or not to use the HDMI Pass Through function. This function allows
video and audio signals input through the HDMI IN jacks on the processor to be output to the
TV connected to the HDMI OUT jack on the processor, even if the processor is in standby
mode.
1.
Select [HDMI Pass Through:] on the menu.
2.
Select a setting.
Back
Returns to the previous screen.
Auto
Optimizes the HDMI Pass Through function of the processor according to the
TV’s power status.
On
(default)
Video and audio signals input through the HDMI IN jacks on the processor are
output to the TV connected to the HDMI OUT jack on the processor, even if the
processor is in standby mode.
Tip
The [Auto] setting alllows the processor to consume less power compared to the [On]
setting. Select [Auto] when you want to save on power consumption.
Note
When the CONTROL FOR HDMI switch is set to “MODE1” and you set this item to
[Auto], the HDMI Pass Through function is turned off a short time (about 30 seconds)
after you turn off the TV, thus power is saved. The orange power indicator dims.
Related topic
Using the menu on the processor
Using the menu on the headphones
Selecting the front display mode of the processor
72
Search