Sony MDR-HW700DS - Manual (Page 98)

Help Guide
MDR-HW700DS Top > Troubleshooting > Possible causes of symptoms >
Getting Started
Connection
Operation
Others
Troubleshooting
Specifications
Important information
Contents list
Low sound
When “ANALOG” is selected with the INPUT button, set the ATT (LINE IN) switch on the
processor to “0dB.”
If you connect the headphone jack of the AV device to either of the LINE IN (L/R) jacks of
the processor, raise the volume level on the connected AV device.
Raise the headphone volume.
The surround sound effect is not obtained.
© 2014 Sony Corporation
94
Search