Sony MDR-HW700DS - Manual (Page 95)

Help Guide
MDR-HW700DS Top > Troubleshooting > Possible causes of symptoms >
Getting Started
Connection
Operation
Others
Troubleshooting
Specifications
Important information
Contents list
The TV is turned on, but the processor does not turn on
automatically.
The CONTROL FOR HDMI switch is set to “MODE2,” or [Control for HDMI:] is set to [Off]
on the menu. In this case, the processor is not turned on when you turn on the TV.
When the CONTROL FOR HDMI switch is set to “MODE1,” check the audio output
settings on the TV. The processor turns on or off in conjunction with the audio output
settings on the TV. If sound was being output from the TV speaker when you turned off
the TV last time, the processor will not turn on even if you turn on the TV.
Wireless LAN of the TV is difficult to connect.
© 2014 Sony Corporation
91
Search