Sony CMT-MX700Ni - Manual (Page 26)

26 GB
Setting up a wireless network
using the WPS PIN code method
If the access point supports the WPS PIN (Personal
Identification Number) code connection, you can
set up a WPS wireless connection by entering the
system’s PIN code into the wireless LAN router/
access point.
1
Press HOME NETWORK to select
the Home Network function.
If the network setting display does not
appear, press OPTIONS.
2
Press M / m to select “Network,” then
press ENTER.
3
Press M / m to select “Settings,” then
press ENTER.
4
Press M / m to select “Wireless LAN
Settings,” then press ENTER.
5
Press M / m to select “Manual
Registration,” then press ENTER.
6
Press M / m to select “WPS PIN,”
then press ENTER.
The available SSID (access point) list
appears.
7
Press M / m to select the desired
network name (SSID), then press
ENTER.
The PIN code (8 digits) of the system
appears. Leave the PIN code displayed until
the connection is complete. (A different PIN
code is displayed each time you perform this
operation.)
8
Input the system PIN code into the
wireless LAN router/access point.
The system starts the network settings.
“Complete!” appears after the network
settings are complete, and “
” lights up on
the display. To return to the options menu,
press ENTER.
(Depending on the network environment, the
network settings may take some time.)
9
Perform the server settings.
To listen to audio content stored on the
server, you need to set up your server
(page 37).
Tips
• When checking the network settings, press OPTIONS,
then select “Network” – “Information” – the desired
setting item on the menu.
• For details on entering the PIN code into the wireless
LAN router/access point, refer to the operating manual
supplied with the wireless LAN router/access point.
Setting up a wired
network
You need the following environment to use the
Home Network, Music Service, and PARTY
STREAMING functions. Confirm your
environment in advance.
A wired LAN home network
environment must be available. (Make
sure that a router is used.)
A device that can be used as a server (a
computer, etc.) must be connected to
your wired LAN home network*.
Internet access must be available.
(When listening to music services.)
* For details on servers which are compatible with this
system, see page 37.
Be sure to use a network (LAN) cable with a ferrite
core (not supplied) or a shielded network cable
(not supplied) for a wired connection.
For details on menu operations and entering
characters during setup, see “Menu/list operation”
(page 15) and “Entering characters” (page 14).
Internet
Router
Server
The unit