Sony DPF-WA700 - Manual (Page 14)

14 GB
Tabl
e of
C
o
n
tent
s
Let
’s
U
s
e
E
njo
y
ing
Mo
re
T
ro
u
b
les
hoo
ti
ng
In
dex
Preparation: 4 Setting up the photo
frame
Follow the on-screen instructions.
1
Calibrate the touch screen.
1 Tap on the screen once.
A circle is displayed.
2 Tap the circles displayed one after another.
After you tap the circles several times, the
calibration display is closed.
3 Tap [Complete].
The language selection display appears.
The settings can be changed later.
• If you did not tap the right spot, try the calibration again.
• Touch Screen Calibration can also be performed, as described in “Changing the Settings”
(page 56). The purpose of the Touch Screen Calibration is to adjust the reaction of the
touch screen properly. Perform it if the touch screen does not react on the tapped position.
• This photo frame employs a resistive-film (pressure-sensitive) touch panel. The pressure-
sensitive panel operates when it detects pressure from your tapping on the panel. The panel
will respond more precisely when you apply pressure to a small area (a point). It is
recommended to tap the panel with a fingertip or plastic fine object. If the panel is tapped
with weak force or on a wide area (with the ball of a finger), it may be slow to respond.
• The touch panel responds to a single point only. Be careful that other finger or part of your
hand does not touch the screen.
2
Select the screen language.
1 Drag with your finger to scroll through the list
and tap to select the language.
2 Tap [Next].
The time zone setting display appears.
Continued r