Sony ICD-UX512BLK - Manual (Page 46)

46 GB
• If the last file is long and you wish to start
playback at a later part of the file, press and
hold
> on the control button to go to the
end of the file, and then press . on the
control button while “FILE END” is lit to go
back to the desired point.
• For files other than the last one, go to the
beginning of the next file and play backward
to the desired point.
Reducing noise in the
playback sound and making
the human voice clearer –
the noise cut function
When the noise cut function is effective in
the playback mode, ambient noise other
than the human voice is reduced. A file is
played back with clear sound quality
because the noise of all frequency bands
including a human voice is reduced.
P Notes
• The effect of the noise cut function may be
different depending on the condition of the
recorded voice.
• When you are using the built-in speaker, the
noise cut function does not work.
• When the noise cut function is effective, the
effect function does not work.
• When you are listening an AAC-LC and
WMA file, the noise cut function does not
work.
1
Press and hold MENU/NOISE CUT for
approximately 2 seconds or longer when
the IC recorder is in the stop or playback
mode.
The “Noise Cut” setting window will be
displayed.
2
Press v or V on the control button to
select “Maximum” or “Medium,” and
then press
N /ENT.
“Noise Cut” is set to “OFF” when you
purchase the IC recorder.
N /ENT
v , V
x STOP
MENU/NOISE CUT