Sony ICD-UX512BLK - Manual (Page 49)

49 GB
Oth
er P
la
y
ba
ck
Op
er
atio
ns
“Effect” is set to “OFF” when you purchase
the IC recorder.
To set your favorite sound level
1
Set “Effect” to “Custom” in step 2, and
then press
N /ENT.
The custom setting window will be
displayed.
2
When you adjust the sound level for the
100 Hz, 300 Hz, 1 kHz, 3 kHz, and
10 kHz bands, press
. or > on the
control button to move to the band to the
left or right, and then press
v or V on the
control button.
The setting can be adjusted in 7 steps
from –3 to +3.
3
Press N /ENT.
4
Press x STOP to exit the menu mode.
P Notes
• When you are using the built-in speaker, this
setting is invalid.
• When the noise cut function is effective, the
effect function does not work.
Pop Stresses middle ranges, ideal for
vocals.
Rock Emphasizes high and low ranges for
a powerful sound.
Jazz Emphasizes high ranges for lively
sound.
Bass1 Emphasizes the bass sound.
Bass2 Emphasizes the bass sound even
more.
Custom You can design your own custom
sound level for 5 bands.
OFF Disables the effect function.