Sony VGP-UPR1 - Manual (Page 38)

VGP-UPR1 (JP/GB/FR/ES/CT/KR) 3-296-348-02(1)
10 GB
Connecting the display
Notes

Before connecting a display to the product, first install
the software of the supplied installation CD (page 5).

This product has two connectors, the MONITOR
connector and the DVI-D connector, for display
connection. The connector to use depends on the type
of display. For information, refer to the instruction
manual of the display.

The DVI-D connector and the MONITOR connector
cannot be used simultaneously.

When a personal computer is connected, a maximum
of two screens can be displayed, including the LCD of
the personal computer.

The maximum output resolution of the product is
1680 × 1050 pixels. However, depending on the
connected display, images may be displayed in lower
resolution.

The connected display will be identified as the third
display in the Windows’ “Display Settings” screen.

Depending on the software you use, the contents may
not appear correctly on the connected display.

Output from the product will be usable through
Extended Desktop Mode.
When connecting a DVI-D
connector compatible display
1
Insert the display cable into the DVI-D
connector of the product.
Note

The DVI-D connector of this product does not comply
to the requirements of HDCP (High-bandwidth
Digital Content Protection).
When connecting a MONITOR
connector compatible display
1
Insert the display cable into the
MONITOR connector of the product.