You can change the Rapid Wake settings in VAIO Control Center.
Rapid Wake is enabled by default. With this function, you can keep your VAIO
computer in Sleep mode without risk of data loss because the computer enters
Sleep mode after your working data is saved on the built-in storage device.
For models that support Rapid Wake + ECO, you can conserve more battery power
by reducing power consumption when the computer is in Sleep mode.

1. Start VAIO Control Center and select Hardware. (See

Searching/Starting

Apps, Settings, or Files

to start VAIO Control Center.)

2. Enable/disable the setting in Rapid Wake.

Note

With Rapid Wake disabled, your working data is not saved on the built-in
storage device when the computer enters Sleep mode. Therefore, if the
computer is turned off during Sleep mode because, for example, the battery
pack runs out of power or the computer is disconnected from an AC power
source, the working data will be lost and cannot be restored. To avoid data
loss, be sure to save the data before the computer enters Sleep mode. With
Rapid Wake disabled, the power indicator light blinks slowly in orange during
Sleep mode, and the charge and power indicator lights blink simultaneously
when the battery pack runs out of power during Sleep mode.
When you use the Hibernate mode, you need to disable Rapid Wake.

Go to Page Top