Sony PCG-GRT250K - Manual (Page 58)

Using Ethernet and dial-up connections
For setting up local area networks (LANs), Ethernet is a widely installed technology. Your computer accommodates both
10BASE-T and 100BASE-TX Ethernet connections, with data transfer speeds of between 10 and 100 Mbps.
To connect to a local area network using a telephone or Ethernet cable
1. Connect an Ethernet or telephone cable to your computer. See To connect an Ethernet cable for more
information.
Connecting an Ethernet Cable
2. Click Start, point to Programs, Accessories, Communications, and click Network and Dial-Up Connections. The
Network and Dial-Up Connections window appears.
3. Click Make New Connection. The Network Connection Wizard window appears.
4. Click Next, and follow the on-screen instructions.
Only connect 10BASE-T and 100BASE-TX cables to the Ethernet port . Do not connect any other type of
network cable or any telephone cable. Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the port. To connect the unit to the network,
see
Using Ethernet and dial-up connections or contact your network administrator.
You can connect to your company network from a remote location and use data, programs, and network resources. See
Microsoft
® Windows ® Help by clicking Help from the Start menu, and then clicking Networking in the left panel.
To connect to a remote network using a telephone or Ethernet cable
1. Connect an Ethernet or telephone cable to your computer. See To connect an Ethernet cable and Setting up a
dial-up Internet connection for more information.
2. From the Start menu, point to Programs, Accessories, Communications, and click Networking and Dial-up
Connections. The Networking and Dial-up Connections window appears.
3. Click Make New Connection. The Networking Connection Wizard appears.
4. Click Next.
5. Follow the on-screen instructions.
Page 58