Sony STR-DE495 - Manual (Page 46)

46
GB
STR-DE595/DE495 4-245-327-15(1) GB
General
Power requirements
Area code Power requirements
U, CA, MX 120 V AC, 60 Hz
CEL, CEK 230 V AC, 50/60 Hz
SP, AR, CN, KR 220 – 230 V AC, 50/60 Hz
E2/E3 120/220/240 V AC, 50/60 Hz
TW 110 V AC, 50/60 Hz
AU 240 V AC, 50Hz
Power consumption
Area code Power consumption
U, MX STR-DE595: 210 W
CA STR-DE595: 310 VA
STR-DE495: 250 VA
CEL, CEK, KR, STR-DE595: 210 W
AU STR-DE495: 180 W
SP STR-DE595: 180 W
STR-DE495: 180 W
CN STR-DE595: 205 W
E2/E3, AR STR-DE595: 210 W
TW STR-DE495: 360 W
Power consumption (during standby mode)
0.3 W
Dimensions 430
Ч 145 Ч 298 mm
(16 7/8
Ч 5 6/8 Ч 11 6/8 in.)
including projecting parts
and controls
Mass (Approx.)
STR-DE595:
7.5 kg (16 lb 9 oz)
STR-DE495: 7.2 kg (15 lb 14 oz)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-U306A (1)
R6 (size-AA) batteries (2)
For details on the area code of the component you
are using, see page 4.
Design and specifications are subject to change
without notice.
Specifications (continued)
AM tuner section
Tuning range
Models of area code U, CA
With 10-kHz tuning scale: 530 – 1710 kHz
6)
With 9-kHz tuning scale: 531 – 1710 kHz 6)
Models of area code E2/E3
With 10-kHz tuning scale: 530 – 1610 kHz
6)
With 9-kHz tuning scale: 531 – 1602 kHz 6)
Models of area code CEL, CEK, SP, CN, TW,
KR, AU
With 9-kHz tuning scale: 531 – 1602 kHz
Models of area code AR, MX
With 10-kHz tuning scale: 530 – 1610 kHz
Antenna Loop antenna
Intermediate Frequency
450 kHz
Usable sensitivity 50 dB/m (at 1,000 kHz or
999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5 % (50 mV/m, 400 Hz)
Selectivity
At 9 kHz:
35 dB
At 10 kHz: 40 dB
6) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down PRESET TUNING + and
press ?/1. All preset stations will be erased when
you change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs
Video:
1 Vp-p, 75 ohms
Component Video (STR-DE595 only, except for
models of area code CEL, CEK):
Y:
1 Vp-p, 75 ohms
P
B
/B-Y: 0.7 Vp-p, 75 ohms
P
R
/R-Y: 0.7 Vp-p, 75 ohms
Outputs
Video:
1 Vp-p, 75 ohms
Component Video (STR-DE595 only, except for
models of area code CEL, CEK):
Y:
1 Vp-p, 75 ohms
P
B
/B-Y: 0.7 Vp-p, 75 ohms
P
R
/R-Y: 0.7 Vp-p, 75 ohms
01GB11ADDU.p65 6/9/03, 4:31 PM 46