Sony ICD-PX820D - Manual (Page 82)

82 GB
Troubleshooting
Troubleshooting
Before taking the IC recorder for repair, check the following sections. Should any problem
persist after you have made these checks, consult your nearest Sony dealer.
Please note that recorded messages may be erased during service or repair work.
IC recorder
Symptom Remedy
The IC recorder cannot be
turned off. • Slide the HOLD switch in the direction of the arrow when the IC
recorder is stopped (page 11).
The IC recorder cannot be
turned on. • The HOLD switch is set. Slide the HOLD switch in the direction
opposite that of the arrow (page 11).
Display does not disappear.
Display appears blurred. • Remove the protective film on the display window before you use
the IC recorder.
The IC recorder does not
operate. • The batteries have been inserted with incorrect polarity (page 9).
• The batteries are weak (page 10).
• The power to the IC recorder is off. Slide the HOLD switch in the
direction opposite that of the arrow (page 11).
• The HOLD function is activated. Slide the HOLD switch in the
direction opposite that of the arrow (page 14).
• You may have formatted the memory of the IC recorder using the
computer. Use the IC recorder formatting function to format the
memory (page 58).
No sound comes from the
speaker. • The volume is turned down completely (page 18).
• Headphones are plugged in (page 35).
Sound comes from the
speaker even when the
headphones are plugged in. • If you plug in the headphones not securely during playback, the
sound may come from the speaker. Unplug the headphones, and
then insert them securely.