Sony RDP-XA700iPN - Manual (Page 17)

13 US
1
Prepare for the following
devices.
• This unit
• Mac or PC
• Wireless LAN router/access point
• Network (LAN) cable (not supplied) if
needed
2
Have your wireless network
name (SSID) and Security Key
(if applicable) available for
reference.
Refer to the operating instructions of the
wireless LAN router/access point.
3
Connect the unit and the Mac or
PC using a network (LAN) cable
(not supplied). Then turn this
unit on.
Wait for about 4 minutes until the LINK
indicator lights up amber.
Tip
You can also perform this procedure
wirelessly. See “To connect wirelessly”
(page 14).
4
Access the [Sony Network
Device Setting] screen.
For Mac
Start Safari and select [Bonjour] under
[Bookmarks], then select [SONY: RDP-
XA700iPN].
For PC
Start the browser and input either of the
following URLs into the browser’s
address bar.
• When using a network (LAN) cable
• When connecting wirelessly
5
Select the desired language
when the [Language Setup]
screen appears.
6
Select [Network Settings] from
the menu.
Option 3: Wi-Fi Connection
using Access Point Scan
SSID (Wireless Network Name)
Security Key (WEP or WPA key)
Network Settings